A novel soluble polyamide containing xanthene structure and trifluoromethylphenoxy pendent

<正>A novel polyamide containing xanthene structure and trifluoromethylphenoxy pendent was prepared from 9,9-bis[4-(4- aminophenoxy)phenyl]xanthene,a novel diamine with 2-(4-trifluoromethylphenoxy)terephthaloyl chloride,by the low temperature polycondensation.This new polyamide with the inherent viscosity of 0.95 dL/g was amorphous and readily soluble in polar solvents such as DMAc,m-cresol,etc.This polyamide showed the glass transition temperature(T_g) of 236℃,decomposition temperature (Td) at 5%weight loss of 455℃and char yield of 56%at 800℃in N_2.Transparent,flexible,and tough film of the polymer cast from DMAc solution exhibited tensile strength of 93 MPa,elongation at break of 14%,initial moduli of 2.2 GPa.The electric properties such as the dielectric constant of 3.03(1 MHz) and surface resistance(2.78×10~(14)Ω),and the moisture uptake of 1.36% were also described.     

Grüss-type bounds for covariances and the notion of quadrant dependence in expectation

We show that Grüss-type probabilistic inequalities for covariances can be considerably sharpened when the underlying random variables are quadrant dependent in expectation (QDE). The herein established covariance bounds not only sharpen the classical Grüss inequality but also improve upon recently derived Grüss-type bounds under the assumption of quadrant dependency (QD), which is stronger than QDE. We illustrate our general results with examples based on specially devised bivariate distributions that are QDE but not QD. Such results play important roles in decision making under uncertainty, and particularly in areas such as economics, finance, and insurance.     

Acyldesilylation of 5-Trimethylsilyl-2-furancarboxaldehyde

5－Acyl－2－furancarboxaldehydes2arelmpol－tantIntermedlateslforsynthesizingnaturallyoccuTTingfuranoldfattyacidswhichhaveantloxldanteffectsandantlneoplastlcactlvltlesInbiologicalsystems－．Nakayamaela尸reportedsuccessfulhalodesllylatlonofethyls－trlm...     

Facile and efficient synthesis of quinoline-4-carboxylic acids under microwave irradiation

<正>A facile and efficient method for the preparation of 2-non-substituted quinoline-4-carboxylic acids is described via the Pfitzinger reaction of isatins with sodium pyruvate following consequent decarboxylation under microwave irradiation.     

发展中的我国中学物理"四个类型实验"

分析总结了半个世纪来我国中学物理教学“4个类型实验”的历史、内涵、功能和教法。     

Terpenoids from the Stems of Drypetes congestiflora

Two new eremophilane‐type sesquiterpenoids, 1α‐hydroxyeremophila‐6,9,11‐trien‐8‐one ( 1 ), 4α‐hydroxyeremophila‐1,9‐diene‐3,8‐dione ( 2 ), and a new friedelane‐type triterpenoid, friedelane‐3α,16β‐diol ( 4 ), along with six known terpenoids, 3 and 5 – 9 , have been isolated from the stems of Drypetes congestiflora. Their structures and relative configurations were elucidated on the basis of detailed spectroscopic analyses and by comparison of their NMR data with those reported in the literature. All of the compounds, 1 – 9 , were isolated for the first time from this species. Compound 3 exhibited moderate cytotoxic activities against the A549 and B16F10 cell lines.     

Ionic liquid and aqueous two‐phase extraction based on salting‐out coupled with high‐performance liquid chromatography for the determination of seven rare ginsenosides in Xue‐Sai‐Tong injection

A method of ionic liquid salt aqueous two‐phase extraction coupled with high‐performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg₆, F₄, 20(S)‐Rg₃, 20(R)‐Rg₃, Rk₃, Rk₁, and Rg₅ in Xue‐Sai‐Tong injection. The injection was mixed with ionic liquid 1‐butyl‐3‐methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two‐phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue‐Sai‐Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.     

Morphology-Directed Selective Production of Ethylene or Ethane from CO2 on a Cu Mesopore Electrode

The electrocatalytic conversion of CO₂ to value-added hydrocarbons is receiving significant attention as a promising way to close the broken carbon-cycle. While most metal catalysts produce C₁ species, such as carbon monoxide and formate, the production of various hydrocarbons and alcohols comprising more than two carbons has been achieved using copper (Cu)-based catalysts only. Methods for producing specific C₂ reduction outcomes with high selectivity, however, are not available thus far. Herein, the morphological effect of a Cu mesopore electrode on the selective production of C₂ products, ethylene or ethane, is presented. Cu mesopore electrodes with precisely controlled pore widths and depths were prepared by using a thermal deposition process on anodized aluminum oxide. With this simple synthesis method, we demonstrated that C₂ chemical selectivity can be tuned by systematically altering the morphology. Supported by computational simulations, we proved that nanomorphology can change the local pH and, additionally, retention time of key intermediates by confining the chemicals inside the pores.     

Catalytic conversion of lactic acid into propylene glycol over various metals supported on silica

Catalytic hydrogenation of lactic acid to propylene glycol was performed over various metals (Ag, Co, Cu, Ni, Pt, and Ru) supported on silica prepared by an incipient wetness impregnation method. The loading amount of each metal was 5 wt%. Crystallinity of the synthesized catalysts was investigated by X-ray diffraction (XRD), and the BET method was utilized to examine the surface area. Pore volume and pore size of catalysts were determined using BJH analysis of the N₂ adsorption isotherm. Particle sizes of various metals were determined from transmission electron microscopy (TEM) images. The catalytic activity was found to be strongly dependent on the supported metal. Among catalysts tested, Ru/SiO₂ showed the highest propylene glycol yield. The yield of propylene glycol increased with pressure, and the highest yield was achieved at 130 °C.